Click here to zoom
LT50 RTS CMO tubular motors have RTS built-in and feature a compact manual override (CMO).
Energy Savings
Comfort & Convenience
PIECE
LT 50 CSI RTS 12 RPM
The carbon footprint calculates the greenhouse gas emissions over the entire life cycle of a product, from the extraction of raw materials to the end of its life. This calculation is based on a recognised international standard (ISO 14025) and is externally checked by Bureau Veritas.
INTERMEDIATE SHAFT :
CABLE RTS CMO 24FT W/NEMA PLUG
DRIVE LT50/60 70 OCTAG AL KIT
2.75 ROUND LT 50 SET
CMO AWNING KIT WITHOUT AWN EYE
LT50 CROWN FOR LIAZA 70
LT50 WHEEL FOR TUBE D.63X1,5 SOFT CLIP
US BRACKET FOR AWNING
ADAPTER HEXA7/HEXA7
LT50 LT60 WHEEL FOR TUBE D71 PERMA
SHAFT SQUARE 13 PIN 12
BALL HOLDER
STD MOTOR TESTER CABLE
CABLE RTS CMO 12FT W/NEMA PLUG
DS70 LT50 SET
CMO AWNING OVERRIDE KIT
CMO CABLE SJTW 3C 3M
3C CMO SJTW CABLE 24FT
PLUG END BRACKET 16MM SQUARE
PLUG END BRACKET :COLLAR
LT50 WHEEL 50*1.5 HARD CLIP
EXTENSION HEXA7 220 MM
LT50 CROWN TUBE D 63 X 1.5
LT50 AND LT60 WHEEL FOR TUBE 70
LT60 WHEEL FOR TUBE DOHNER WIT H GUT
ADJUSTABLE TOOL LT CSI
70 OCTAG LT50 SET
70 OCTAG 500S CROWN KIT
BALL DIAM EXT:22 DIAM INT:10
LT60 WHEEL TUBE 89X2
PLUG END FOR HIGH LOAD
FTS60 PLUG END BRACKET
VIBRATION FREE PLUG END BRACKET
LT50 AND LT60 WHEEL FOR TUBE DOHNER
LT50 AND 60 WHEEL FOR TUBE D85
US MULTI-ENTRAXE CSI BRACKET
NYLON BEARING FOR SHAFT D12
3 CONDUCTOR CABLE SJTW 60 DEG
2.5 ROUND LT50 SET
NYLON BALL BORE DIAM 12
LT50 WHEEL 50*1.5 WEAK CLIP LIMIT 50 NM
ZINCKED PLUG END BRACK. PIN 10
BRACE TO BE FIXED ON WALL OR CEILING
COMPLET INTERMEDIATE BRACKET
ADJUSTABLE PLUG END PIN D12
LONG EYE OUTLET
LEFT LT50 ABS WHEEL
GEIGER EYE OUTLET L=100mm
UNIVERSAL JOINT 7HEX TO 8SQ.
CABLE RTS CMO 18FT W/NEMA PLUG
PLUG END D63 WITHOUT SHAFT
CONTROL SHAFT CSI LG100 USING LIMIT : RANGE CSI
LT50 CROWN FOR TUBE MP 65
LT50 CROWN FOR DOHNER 85
LT50-60 WHEEL FOR TUBE D78 DOH NER
LT50 STOP WHEEL
KIT LT CSI BRACKET
DS74 LT50 SET
MODIFIED 761004 KEY WAY WIDEND
CMO ME AWNING OVERRIDE KIT
SHORT EYE OUTLET FOR SUNEA
PLUG END D50 WITHOUT SHAFT
DRIVE WHEEL LT DIAM 63
LT50 CROWN TUBE OCTO 60
LT50 CROWN FOR 70MM TUBE
60 OCTAG TYPE A LT50 SET
INTERMEDIATE BRACKET
ZINCKED PLUG END BRACK. PIN 12
LT60 WHEEL TUBE 102X2
ADJUSTABLE PLUG END PIN D10
ADJUSTABLE PLUG END SHORT PIN
PLUG END BRACKET WITH BALL FOR PIN DIAM 12
CSI BRACKET 100 X 100
LT50 CROWN FOR DIAM 76/78
LT50 CROWN FOR DOHNER 70
LT50 WHEEL FOR TUBE D70 DOHN WITH GUT IMBAC D.71X2
DS78 LT50 SET
EXTENSION HEXA7 330 MM
PLUG END D47 X 100 W/O AXIS 12
RIGHT LT50 ABS WHEEL
LT50 CROWN FOR TUBE D.70
LT50 WHEEL FOR TUBE OCTO 60 SELVE,DOHNER,F5860
LT50 WHEEL FOR TUBE D.65 MADOPRON,SUNMASTER
LT50 WHEEL FOR PERMA TUBES