Bus and Sensor Station Power Supply

 Versatile Operation

• Powering a bus using pass-through data:
  • Incoming Somfy Digital Network™ (SDN) data will be joined with the power output from the Bus Power Supply and routed to the output port.
  • Function could be used in riser-based systems where the input is likely coming from a repeater.
• Powering a bus without pass-through data:
  • Power the 120V AC connection using an approved outlet.
  • Connect a bus line directly to the output port of the Bus Power Supply.
  • Sends power out to a bus segment and is used when bus distribution is designed in one centralized location.
• Power and data distribution for animeo IP sensors:
  • Power the animeo IP Compact Sensor or Sensor Station by connecting the Building or Sub Controller sensor bus output to the Bus Power Supply pass-through input.  
  • Then connect the Compact Sensor or Sensor Station’s outdoor sensor box to the Bus Power Supply Power /Data output. 
  • One power supply is required per Sensor Station or Compact Sensor in all animeo IP systems.
• Use during system configuration:
  • The Power Supply can be used as a tool for temporary power while configuring SDN systems.
  • Connect a USB to RS485 adapter (#9015260) to the SDN data pass-through input and the device to be programmed to the SDN Power/Data output.
  • Allow signals from the programming device to appear in the system configuration.