Click here to zoom
MOTOR DMI5 20NM/12RPM-120/60-C2,5M WHITE
The carbon footprint calculates the greenhouse gas emissions over the entire life cycle of a product, from the extraction of raw materials to the end of its life. This calculation is based on a recognised international standard (ISO 14025) and is externally checked by Bureau Veritas.
DRIVE LT50/60 70 OCTAG AL
T5 08.5 ALU. 70MM OCT. SET
107MM SLEEVE FOR RAYNOR
SHORT EYE OUTLET FOR SUNEA
MSIX BRACKET:KIT->CIC PLATE
ADAPTOR NT5 SIMU OCT70
LT50 CROWN TUBE OCTO 60
UNIVERSAL JOINT 7HEX TO 8SQ.
T5/T6 60MM RD. ALU DRIVE
CROWN NT5 IMBAC85
LT50 CROWN FOR TUBE MP 65
LT50 CROWN FOR DOHNER 85
LT50 STOP WHEEL
BALL BEARING BRACKET DIAM 10
DS78 LT50 SET
SHAFT CONN. SLEEVE HEX7 TO SQ8
T5 05.5 ALU. 60MM OCT. SET
BRACKET FOR ROLLER SHUTTER
EXTENSION HEXA7 330 MM
LT50 CROWN FOR TUBE D.70
LT50 WHEEL FOR TUBE OCTO 60 SELVE,DOHNER,F5860
LT50 WHEEL FOR TUBE D.65 MADOPRON,SUNMASTER
LT50 WHEEL FOR PERMA TUBES
LT60 WHEEL TUBE 70X1,5 AND 2
ADJUSTABLE PLUG END PIN D10
ADAPTOR NT5 IMBAC 70 ROUND GUT
ADAPTOR NT5 HASSINGER 7185
ADAPTOR NT5 OCT 050 SELVE
CSI BRACKET 100 X 100
LT50 CROWN FOR DIAM 76/78
LT50 WHEEL FOR TUBE D70 DOHN WITH GUT IMBAC D.71X2
BEARING OPPOSITE SIDE NYLON
T5 60.5 ALU. 60MM ROUND SET
T5 05.5R ALU 60MM OCT. DRIVE
BALL DIAM EXT:22 DIAM INT:10
LT60 WHEEL TUBE IMBAC 85
BRACKET FOR AWNING WITN CENTR.
MSIX BRACKET:KIT->OCTAGONAL PLATE
LT50 AND LT60 WHEEL FOR TUBE DOHNER
LT50 AND 60 WHEEL FOR TUBE D85
ADJ. SHUTTER PLATE FOR DMI
NYLON BALL BORE DIAM 12
LT50 CROWN FOR TUBE 70 WITH GUT
LT50 WHEEL 50*1.5 WEAK CLIP LIMIT 50 NM
ADJUSTABLE PLUG END PIN D12
BALL HOLDER
STD MOTOR TESTER CABLE
LT50 WHEEL 50*1.5 HARD CLIP
EXTENSION HEXA7 220 MM
ADAPTOR NT5 DOHNER 74 FLAT GUT
ADAPTOR NT5 OCT.60
CROWN NT5 SIMU OCT70
LT50 CROWN TUBE D 63 X 1.5
LT50 AND LT60 WHEEL FOR TUBE 70
2.0TUBE CORD TAKE-UP REEL
LT50 WHEEL FOR TUBE D.63X1,5 SOFT CLIP
ADAPTOR NT5 D.INT.60
ADAPTER HEXA7/HEXA7